Fire Damage Repair in Sharpes, FL
The cleanup crew hauled out the debris and the smell is finally fading, but your house is still bare studs and subfloor. One free call to Unify Fire Solutions connects you with a licensed and insured independent contractor in Sharpes who handles the rebuild: framing, wiring, drywall, roofing and the finish work that makes it feel like home again. Dispatch starts while you are still on the line, and the phone is answered 24/7.
- Independent rebuild pros who start from the adjuster's scope
- A written, line-item estimate before any framing starts
- Crews that handle permit pulls and inspection visits
Getting your home back after the cleanup
Cleanup makes a burned house safe and empty. Repair is the longer stretch that turns it back into a place you can live, and it runs on permits, inspections and an insurance scope that rarely covers everything on the first pass.
Independent Pros, Licensed and Insured
Reconstruction is general contracting, and most jurisdictions require a licensed contractor to pull the building permit. Each contractor we refer is an independent business with its own license and insurance, and wiring and plumbing go to licensed trade subs. Ask to see the license and a certificate of insurance before you sign, then verify both.
Written Estimates Before Work
A rebuild should never start on a verbal number. The contractor who walks your property writes a line-item estimate, usually in the same estimating format insurers use, so each line can be held up against the adjuster's scope. Anything left out, like ceiling texture or a code-required breaker, is easy to spot on paper.
Rapid Local Dispatch
Our dispatchers answer 24/7 and start matching you with a contractor near Sharpes during the first call. A walkthrough often happens the same day or the next, depending on crew availability and distance. That puts a real number on the adjuster's desk sooner.
The Right Reconstruction Tools
Rebuild crews show up with gear a cleanup crew never carries. Expect moisture meters to confirm framing is dry before it gets closed in, framing nailers and joist hangers, laser levels for flattening a sistered floor, and a paint spectrophotometer for blending new walls into the rooms that survived.
Fire Damage Repair from the framing out
No two fire losses match, yet the rebuild nearly always runs in one sequence: structure first, then systems, then the shell, then finishes.
The hardest part for most homeowners is not the construction itself. It is knowing what should be on the list. An adjuster writing a scope from the doorway can miss the joist that is charred on its top edge, the circuit that cooked inside a wall two rooms away, or the PEX line that sagged above the ceiling. A contractor who opens wall cavities and probes the lumber catches those items while the walls are still open, not a year later.
The work below is what the independent contractors in our network typically handle on a fire rebuild in Sharpes. Your job may need some of it or all of it, and the written estimate will spell out which.
Scope and Estimate Review
The adjuster's scope is the starting point, not the final word. The crew checks every line against the real damage and writes a supplement for whatever was left out.
- Line-by-line comparison with the scope of loss
- Photos and measurements behind each supplement
- Meeting the adjuster on site when needed
Joists, Studs and Framing
Charred lumber gets probed and measured, not guessed at. Lightly burned joists are usually sistered with fresh lumber, and deeply charred or split members get cut out and replaced.
- Char depth checks with an awl or probe
- Sistering, new headers and top plates
- Engineer review for load-bearing changes
Wiring and Plumbing Replacement
Heat travels along a circuit well past the burn line. Insulation on cable can turn brittle or melt inside a wall, so licensed electricians usually replace circuits that ran through the hot zone. PVC softens at modest temperatures and PEX is not built for fire heat, so melted runs get replaced by licensed plumbers.
- New circuits, boxes and panel work
- Melted PEX, PVC and fittings replaced
- Pressure test before the walls close
Insulation, Barriers and Drywall
After the framing inspection, the walls are rebuilt in layers: insulation, a vapor retarder where code requires one, then board, tape, mud and texture.
- Batts, blown cellulose or foam to code
- Type X board on garage and rated walls
- Texture matched to surviving rooms
Roof Decking, Windows and Doors
When a fire breaks through the roof, it leaves burned rafters, delaminated decking and shingles that will not lie flat again. The contractor replaces decking, underlayment and roofing, then sets new windows and exterior doors where heat cracked glass or warped frames.
- Rafter repair and new roof decking
- Underlayment, flashing and roofing
- Replacement windows and entry doors
Flooring, Cabinets and Finishes
The last stage is the one you will see every single day. New cabinets, counters and flooring go in, paint is color-matched, and trim is milled or sourced to match the profiles in the rooms that made it through.
- Cabinet and countertop replacement
- Flooring matched or replaced room to room
- Paint, trim and hardware matching
About code upgrades: A permit for fire repairs can trigger current-code items your house never had, such as interconnected smoke and CO alarms or arc-fault breakers on bedroom circuits. Many policies carry ordinance-or-law coverage that may help with the extra cost. Limits vary, so ask your adjuster what your policy says before the permit is pulled.
Ready to start the rebuild?
A single free call puts you in touch with an independent rebuild contractor in the Sharpes area, any hour of the day.
Call +1-833-336-1630Four steps from phone call to punch list
A typical rebuild runs for weeks or months, not days, so it helps to know the shape of it before you start.
- 1
Reach a Live Dispatcher
Let the dispatcher know how far cleanup has gotten, whether you have an adjuster's scope yet, and which rooms took the fire. The call is free, and the line is open 24/7.
- 2
Your Walkthrough Gets Scheduled
Dispatch matches a reconstruction contractor near Sharpes, who sets a walkthrough time, frequently the same day or the next. Timing depends on crew availability and distance.
- 3
Assessment and Written Quote
The contractor probes framing, takes moisture readings, opens a few wall cavities to trace wiring, and photographs everything. A written, line-item estimate follows, and you review it with your adjuster before anyone picks up a hammer.
- 4
Work Done, Then a Walkthrough
Permits are pulled, rough-in inspections pass, and the house is closed in and finished. The job ends with a room-by-room walkthrough and a punch list, and the final sign-off waits until every line is cleared.
What Sharpes homeowners said about the rebuild
The insurance scope only listed drywall and paint over the stove. The contractor pulled the ceiling and found the joists above it charred halfway through. He sistered three of them, sent photos to the adjuster, and the supplement was approved the following week.
Our garage fire looked contained, but the electrician found melted cable jackets running into the laundry room wall. They rewired those runs, hung Type X board in the garage, and it passed inspection the first time.
I own a duplex and had tenants waiting to move back in. The contractor pulled the permit, called me after each inspection, and cleared the punch list in a couple of days. My tenants were home sooner than I expected.
What I worried about was the hallway. Half the oak floor burned and half did not. They wove new boards into the old ones, refinished the whole run, and you honestly cannot tell where the fire stopped.
Common questions about rebuilding
How long does it take to rebuild a house after a fire?
A single-room kitchen fire can be rebuilt in a few weeks once the estimate is approved. When the damage spreads to the roof or multiple rooms, plan on several months, since permits, inspections and backordered materials all add time. Ask the contractor for a written schedule with the inspection points marked.
Do I need a building permit to repair fire damage?
Usually, yes, as soon as the work involves more than paint and trim. New framing, circuits, pipes or roofing nearly always need a permit, with inspections at rough-in and at the end. The licensed contractor normally pulls it, and the inspector's sign-off protects you when you sell or refinance later.
Can charred joists be repaired, or do they have to be replaced?
It depends on how deep the char goes and whether the member still carries its load. Surface char is often sanded or scraped, sealed and left in place, and moderate char is commonly sistered with new lumber. Deep char, cracking or sagging generally means replacement, sometimes with an engineer's letter.
Does all the wiring have to be replaced after a house fire?
Not every wire, though anything that ran through the hot area needs inspection and is commonly replaced. Cable insulation can be heat-damaged inside a cavity even when the wall surface looks untouched. A licensed electrician traces the runs, tests them, and the work is inspected before walls close.
What if the contractor's estimate is higher than the insurance adjuster's?
It happens a lot, and it usually does not mean someone is inflating the bill. The contractor writes a supplement that lists the missing items with photos and measurements, and the adjuster reviews it. Many differences come from hidden damage that was found once walls and ceilings were opened.
Who pays for code upgrades when rebuilding after a fire?
Ordinance-or-law coverage, included in many policies, may help pay to bring rebuilt areas up to today's code. Limits and terms vary widely, so read your declarations page or ask your adjuster before work starts. Typical items are smoke and CO alarms, arc-fault breakers and updated stair or egress details.
Fire Damage Repair across Sharpes and nearby areas
Calls come in from all over Sharpes and the surrounding area, from older houses with plaster walls to newer homes with engineered floor joists and PEX manifolds. Your dispatcher connects you with an independent contractor who already works near you and knows how the local permit desk runs.
- Kitchen rebuilds
- Garage fires
- Roof and attic losses
- Rental units
- Condos and townhomes
- Small businesses
Zip codes we take calls from include 32959 32927 32926. If the cleanup is done and you are ready to get your home back, call now and a dispatcher will start the match. If the first contractor is not the right fit, call back and we will connect you with another one.
